VONTRON ULP1812-75 blue reverse-osmosis membrane in an angled view
Close-up of an 1812 RO membrane end showing spiral layers, centre tube and two black sealing rings
VONTRON ULP1812-75 blue reverse-osmosis membrane in an angled view
Close-up of an 1812 RO membrane end showing spiral layers, centre tube and two black sealing rings
FLT-CTO-20 20-inch CTO carbon-block cartridge, front view, with mesh covering and white end caps
CTO (Chlorine Taste Odor Reduction Filter) 20 Inch
Back to products
FLT-T33-10 white T33 inline coconut carbon filter cartridge in an upright view
10-Inch T33 Inline Coconut Carbon Filter Cartridge
VONTRON

RO membrane 75G

VONTRON ULP1812-75 replacement RO membrane for compatible 1812 housings. Rated 75 GPD (approximately 284 L/day) with 97.5% stabilised salt rejection under stated test conditions. 298 × 46 mm • Sold individually.

Contact for Price & Availability
Add to quote
TELEGRAM CHAT
SKU: FLT-RO-ME75 Category:
Overview

75G Reverse-Osmosis Membrane for Compatible Home Systems

The FLT-RO-ME75 is a VONTRON ULP1812-75 reverse-osmosis membrane for compatible household RO water purifiers. The spiral-wound membrane provides the RO separation stage, helping reduce dissolved salts in the feed water.

Rated Output and Salt Rejection

The membrane is rated at 75 US gallons per day, approximately 284 L/day or 11.8 L/h, under the stated test conditions. Stabilised salt rejection is 97.5%, with a minimum of 96.0%. These figures describe membrane test performance; actual water production and rejection depend on feed-water quality, pressure, temperature and system setup.

Test conditions: 4.1 bar (60 psi), 25 °C, 250 ppm NaCl solution, pH 6.5–8.5 and 15% recovery. The test pressure is a performance reference, not an operating-pressure recommendation for every RO system.

Check Compatibility Before Ordering

Check the 1812 membrane housing, overall dimensions, end connections and sealing arrangement against your existing membrane. The system pump and flow restrictor must suit a 75G membrane. A matching nominal size alone does not guarantee compatibility.

Use the membrane within a complete RO system with appropriate pretreatment. Compatible carbon pre-filtration and sediment filtration help prepare the feed water according to the system requirements.

Installation and Startup

Isolate the water supply and power, then depressurise the system before opening the membrane housing. Remove the packaging immediately before installation, seat the membrane and seals correctly, and check the housing and connections for leaks when restarting.

Follow the RO system instructions for startup flushing. The supplied membrane guidance states that product water from the first hour of initial operation should be discarded. Complete the required flushing before collecting water for use.

Replacement and Service Support

Monitor treated-water quality and production rate as part of routine system maintenance. Replacement needs depend on feed-water quality, pretreatment and usage; a fixed replacement interval has not been specified for this model.

Contact Aqua Cares Cambodia on Telegram at @AquaCaresCambodia for compatibility advice, price and availability, replacement support or warranty information.

Specifications
Dimensions298 × 46 × 46 mm
ModelFLT-RO-ME75
Membrane ModelVONTRON ULP1812-75 (1812-75G)
Filtration TypeReverse osmosis (RO)
Rated Production75 US gal/day (approximately 284 L/day or 11.8 L/h), under stated test conditions
Stabilised Salt Rejection97.5%, under stated test conditions
Minimum Salt Rejection96.0%, under stated test conditions
Dimensions298 mm overall length × 46 mm diameter
Centre Tube Diameter17 mm
End Connection Diameter18.5 mm (D1/D2)
Applicable Temperature5–45 °C
Test Pressure4.1 bar (60 psi)
Test Water Temperature25 °C
Test NaCl Concentration250 ppm
Test pH6.5–8.5
Test Recovery15%
ApplicationCompatible 1812 membrane housings in household RO water purifiers
Sale Unit1 membrane element
In the Box

VONTRON ULP1812-75 blue reverse-osmosis membrane in an angled view

  • 1 FLT-RO-ME75 VONTRON ULP1812-75 (1812-75G) RO membrane element

Sold individually. The membrane-end image in the gallery illustrates the 1812 construction.

Support
Technician Installing Under-Sink Purifier
https://aquacares2u.com/wp-admin

Product Support

Need help with installation, operation, maintenance or replacement filters and spare parts? Aqua Cares provides reliable local after-sales support for this product.

How Can We Help?

  • Installation and operating guidance
  • User manual and product documents
  • Replacement filters and spare parts
  • Maintenance and troubleshooting assistance
  • Support by phone, Telegram or email
Chat on Telegram