10-Inch Quick-Connect PP Sediment Filter Cartridge – Large
10-inch first-stage quick-connect melt-blown PP sediment cartridge for compatible water purifiers. Helps reduce sand, rust and suspended particles. 5 µm • 3.7 L/min • 1–4 bar • 4–38 °C • 260 × 65 mm • 200 g • USD 4 each.
First-Stage Melt-Blown PP Sediment Filtration
The FLT-PP-B is a 10-inch quick-connect polypropylene cartridge designed as a first-stage pre-filter in compatible domestic water purifiers. Its graded melt-blown PP media is rated at 5 µm and helps reduce sand, rust, granules, colloids and other suspended particles in municipal tap water. It can be used ahead of compatible UF or RO stages as part of the purifier’s specified filtration sequence.
Key Features
- 5 µm filtration rating: Helps capture fine suspended particles.
- Graded melt-blown PP media: Filter layers become progressively finer from the outside inward.
- Food-grade PP material: As specified in the supplied product information.
- Quick-connect format: Check the connection and purifier requirements before ordering.
Specifications
- Model: FLT-PP-B
- Filter type: Melt-blown PP sediment cartridge
- Nominal filtration rating: 5 µm
- Nominal size: 10 inch
- Dimensions: 260 mm length × 65 mm diameter
- Connection: Quick-connect; specified to match the FLT-UF-10
- Rated flow: 3.7 L/min
- Operating pressure: 1–4 bar
- Water temperature: 4–38 °C
- Approximate unit weight: 200 g
- Typical installation stage: First stage
- Suggested replacement interval: 3–6 months, depending on water quality and usage
- Sale unit: 1 cartridge
- Carton quantity: 50 cartridges
Compatibility and Installation
Before ordering, compare the cartridge dimensions, connection and purifier requirements. A nominal 10-inch size alone does not guarantee compatibility. Isolate the water supply and depressurise the system before replacement. Remove the old cartridge, connect the new cartridge according to the purifier instructions, restore the supply and check for leaks. Follow the equipment manufacturer’s flushing instructions before use.
Replace the cartridge according to water quality, usage and the purifier maintenance instructions.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 260 × 65 × 65 mm |
| Model | FLT-PP-B |
| Filter Type | Melt-blown PP sediment cartridge |
| Filter Media | Graded melt-blown polypropylene (PP) |
| Nominal Filtration Rating | 5 µm |
| Nominal Size | 10 inch |
| Material | Food-grade PP |
| Water Source | Municipal tap water |
| Dimensions | 260 mm length × 65 mm diameter |
| Connection | Quick-connect; same as FLT-UF-10 |
| Rated Flow Rate | 3.7 L/min |
| Operating Pressure | 1–4 bar |
| Water Temperature | 4–38 °C |
| Typical Installation Stage | First stage |
| Suggested Replacement Interval | 3–6 months, depending on water quality and usage |
| Approximate Unit Weight | 200 g |
| Carton Quantity | 50 cartridges |
| Sale Unit | 1 cartridge |

- 1 FLT-PP-B 10-inch quick-connect PP sediment filter cartridge
Sold individually.
Product Support
Need help with installation, operation, maintenance or replacement filters and spare parts? Aqua Cares provides reliable local after-sales support for this product.
How Can We Help?
- Installation and operating guidance
- User manual and product documents
- Replacement filters and spare parts
- Maintenance and troubleshooting assistance
- Support by phone, Telegram or email